It’s obvious. Even the most courageous individuals become anxious when it comes to hanging Christmas EverLights. However, you are not destined to a jumbled mess with lights that shine from just three directions. With determination, imagination, and a dash of practical wisdom, you can absolutely rock your Christmas display.
Make sure every string is in good working order before you go climbing. Finding dead bulbs after suspending them 20 feet above earth, with the wind howling and your fingertips freezing, is half the battle. Just proceed with functional lights after you’ve plugged everything in and shaken out any tangles. You can avoid hassles later on by drawing out a plan before you begin.
Rely on your anchors with caution. Gutters, eaves, and window frames—everything is functional. Avoid making gaps that aren’t essential. Swap out the nails and staples for plastic clips. They won’t rip your house apart in January, are inexpensive, and hook right on. Determine if you’ll be attaching the clips to shingles, brick, or gutters before making your selection.
Making preparations in Advance? Sketch out a rough outline. If you only have a rough idea of where the lights should go, you won’t need drawings. The installation goes more smoothly with more specifics. Take note of the distances between outlets and the power source. A half-diamond driveway won’t cut it; extension wires must span the entire yard.
Symmetry should not be overlooked. Every design, no matter how chaotic, appears more organized. Using balanced trees and strong lines, you may reclaim the street in the event that your neighbor’s lawn inflatables organize a coup. Both white and multicolor look great when executed deliberately.
Make sure circuits aren’t overloaded. With just one plug, Grandma destroyed her ancestral home. Stay out of grandma’s way. Manufacturers print the maximum number of connectable strands on every light string, so be sure to read the tag. If you’re still unsure, use a grounded power strip to divide the outlets.
Duplicated layers give a sense of depth. Embrace the trunks of trees, wind around columns, and adorn fences. Illuminate bushes and shrubs with net lights, but string icicle lights along the gutter. Plus, you’ll save time and effort because the net lights just drape over.
Finalize any unfinished business. Tape or fasten cables along the ground to test your patience with the wind. Do not place plugs or splitters on soil, as water and electricity do not get along.
Wake up early and get a good start on your day. Problems are easier to see in the sunlight. Not to mention that you won’t have to use your chilly fingers to pinch each individual bulb. If it’s too cold, offer someone cookies as an incentive, or promise them hot cocoa afterwards.
One thing that jumps out is creativity. Synced music, a lighting garden gnome, or an illuminated “Merry Christmas” sign are all great ways to liven things up. A house with a disco yard is an unforgettable sight.
Make sure to test your setup nightly. Half of your troubles are solved with a short stroll outside, and your display will remain sparkling bright all through December.
When everything else fails, just give a buddy a ring. Working in pairs reduces fatigue and saves time. Plus, stringing Christmas lights was always meant to be a group effort. Enjoy yourself. Take it easy. Show off each string with pride. This season, you will be the center of attention.